Racing: free GLB models by vinish.dev
============================================================

Page: https://vinish.dev/free-3d-models/racing/
Licence: CC BY 4.0 (see LICENSE.txt). Credit lines: CREDITS.txt.

What is inside
--------------
- 13 GLB files (binary glTF 2.0), one model each, plus a preview image of each in previews/.
- Sizes are in metres (width x depth x height below). +Y is up, the front faces +Z, the origin is on the ground.
- The textures (colour and normal maps) are packed inside each GLB.
- Moving parts are separate nodes with their pivots at the joints or hinges. Their names are listed below.

Models
------
formula-racer.glb  Formula Racer (Open-wheel race car): 34,990 triangles, 1.1 MB, 1.98 x 5.92 x 1.06 m
  A modern open-wheel single-seater: halo, front and rear wings, sidepods, slick tyres. The wheels, steering wheel and the top rear flap are separate nodes.
  Nodes: Body, Steering_Wheel, Rear_Wing_Flap, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

classic-formula-racer.glb  Classic Formula Racer (Vintage open-wheel race car): 41,929 triangles, 969 KB, 1.64 x 4.15 x 0.93 m
  A 1960s-style cigar-shaped single-seater: wrap-round screen, chrome roll bar, intake trumpets, swept exhausts, coil-over suspension and wire wheels.
  Nodes: Body, Steering_Wheel, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

gt-race-car.glb  GT Race Car (Closed-wheel race car): 23,800 triangles, 569 KB, 2.17 x 4.86 x 1.48 m
  A wide-body GT coupé built for the track: splitter, swan-neck rear wing, side exhausts, door number boards and slick tyres on centre-lock wheels.
  Nodes: Body, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

endurance-prototype.glb  Endurance Prototype (Closed-cockpit race car): 25,136 triangles, 556 KB, 2.00 x 5.26 x 1.22 m
  A long-tail endurance prototype: closed bubble cockpit, tall front fenders, shark fin with the race number, full-width rear light bar and a wide rear wing.
  Nodes: Body, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

rally-car.glb  Rally Car (Gravel rally hatchback): 30,357 triangles, 480 KB, 2.02 x 4.12 x 1.50 m
  A gravel-spec rally hatchback: raised ride height, block-tread tyres on white rims, bonnet light pod, roof vent, hatch spoiler and mud flaps.
  Nodes: Body, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

racing-kart.glb  Racing Kart (Sprint go-kart): 24,392 triangles, 527 KB, 1.45 x 1.94 x 0.52 m
  A sprint racing kart: tube chassis, side-mounted engine with chain drive and silencer, moulded seat, nose fairing with a number panel and slick tyres.
  Nodes: Body, Steering_Wheel, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

racing-superbike.glb  Racing Superbike (Sport motorcycle): 22,947 triangles, 736 KB, 0.72 x 2.04 x 1.05 m
  A full-fairing racing superbike: twin-spar frame, upside-down fork, twin front discs, number boards and slick tyres. Fork, swingarm and both wheels are separate nodes.
  Nodes: Body, Fork, Wheel_Front, Swingarm, Wheel_Rear

motocross-bike.glb  Motocross Bike (Off-road dirt bike): 27,022 triangles, 864 KB, 0.84 x 2.20 x 1.17 m
  A long-travel motocross bike: knobby tyres on laced wheels, high front fender, side number plates, exposed single-cylinder engine. Fork, swingarm and wheels are separate nodes.
  Nodes: Body, Fork, Wheel_Front, Swingarm, Wheel_Rear

tyre-barrier.glb  Tyre Barrier (Track prop): 9,504 triangles, 202 KB, 1.80 x 1.23 x 0.80 m
  A 1.8 m section of trackside tyre wall: stacks of old tyres four high and two deep behind a blue and white belt, bolted through.

race-kerb.glb  Race Track Kerb (Track prop): 397 triangles, 43 KB, 3.00 x 0.42 x 0.06 m
  A 3 m straight kerb in red and white blocks with a rounded top. Line several up along a corner.

traffic-cone.glb  Traffic Cone (Track prop): 652 triangles, 17 KB, 0.38 x 0.38 x 0.72 m
  A 72 cm traffic cone with two reflective bands on a square base, for cone courses, roadworks and car parks.

start-lights.glb  Start Light Gantry (Track prop): 3,144 triangles, 129 KB, 12.80 x 0.80 x 5.50 m
  A starting gantry across a 12 m grid with five columns of red lamps. Each column is its own node: show them one by one, then hide all to start.
  Nodes: Gantry, Light_1, Light_2, Light_3, Light_4, Light_5

chequered-flag.glb  Chequered Flag (Track prop): 600 triangles, 17 KB, 0.93 x 0.09 x 1.64 m
  A waving black and white chequered flag on a 1.6 m pole, for the finish line or a winner pose.


How to use
----------
three.js: GLTFLoader. Unity: the glTFast package (com.unity.cloud.gltfast). Godot 4: drop the .glb in the
FileSystem dock. Blender: File > Import > glTF 2.0, and export to FBX, OBJ or STL from there if you need to.

More free models: https://vinish.dev/free-3d-models/
