Dinosaurs: free GLB models by vinish.dev
============================================================

Page: https://vinish.dev/free-3d-models/dinosaurs/
Licence: CC BY 4.0 (see LICENSE.txt). Credit lines: CREDITS.txt.

What is inside
--------------
- 10 GLB files (binary glTF 2.0), one model each, plus a preview image of each in previews/.
- Sizes are in metres (width x depth x height below). +Y is up, the front faces +Z, the origin is on the ground.
- The textures (colour and normal maps) are packed inside each GLB.
- Moving parts are separate nodes with their pivots at the joints or hinges. Their names are listed below.

Models
------
tyrannosaurus-rex.glb  Tyrannosaurus Rex (Dinosaur): 17,100 triangles, 960 KB, 2.05 x 12.30 x 4.33 m
  A life-size T. rex, 12.3 m long and 3.6 m at the hip: a deep skull with rows of teeth and a jaw that opens, tiny two-fingered arms, three-toed feet and a long balancing tail. Idle, Walk, Run and Roar clips.
  Nodes: Tyrannosaurus, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Arm_L, Arm_R

triceratops.glb  Triceratops (Dinosaur): 24,588 triangles, 1.2 MB, 2.27 x 8.53 x 2.91 m
  A life-size Triceratops, 8.5 m long: a 2.4 m skull with two long brow horns, a short nose horn, a parrot beak that opens and a wide frill with a bony scalloped rim, on four sturdy hoofed legs. Idle, Walk, Run and Roar clips.
  Nodes: Triceratops, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Leg_FL, Shin_FL, Leg_FR, Shin_FR

stegosaurus.glb  Stegosaurus (Dinosaur): 28,179 triangles, 1.4 MB, 1.71 x 7.42 x 3.37 m
  A life-size Stegosaurus, 7.5 m long: 17 tall back plates in two staggered rows, four long tail spikes, a tiny beaked head held low and long hind legs that lift the hips high. Idle, Walk, Run and Roar clips.
  Nodes: Stegosaurus, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Leg_FL, Shin_FL, Leg_FR, Shin_FR

brachiosaurus.glb  Brachiosaurus (Dinosaur): 16,088 triangles, 933 KB, 3.23 x 21.29 x 12.42 m
  A life-size Brachiosaurus, 21 m long and 12.4 m tall: a long neck raised high in two parts that bend, a small head with an arch over the nose, longer front legs on padded column feet and a short tail. Idle, Walk, Run and Roar clips.
  Nodes: Brachiosaurus, Neck, Neck_2, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Leg_FL, Shin_FL, Foot_FL, Leg_FR, Shin_FR, Foot_FR

ankylosaurus.glb  Ankylosaurus (Dinosaur): 24,740 triangles, 1.3 MB, 2.16 x 6.98 x 1.67 m
  A life-size Ankylosaurus, 6.5 m long and broad and low: rows of keeled bony scutes over the back, spikes along the flanks, a wide horned head with a beak and a heavy bony club at the end of the tail. Idle, Walk, Run and Roar clips.
  Nodes: Ankylosaurus, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Leg_FL, Shin_FL, Leg_FR, Shin_FR

parasaurolophus.glb  Parasaurolophus (Dinosaur): 19,284 triangles, 985 KB, 1.70 x 9.48 x 3.40 m
  A life-size Parasaurolophus, 9.5 m long: a duck-billed head with a long hollow crest sweeping back past the neck, slim front legs, strong hind legs and a deep tail. Idle, Walk, Run and Roar clips.
  Nodes: Parasaurolophus, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Leg_FL, Shin_FL, Leg_FR, Shin_FR

velociraptor.glb  Velociraptor (Dinosaur): 16,156 triangles, 969 KB, 0.27 x 2.17 x 0.86 m
  A life-size, feathered Velociraptor, 2 m long and 0.5 m at the hip: a long low head with small curved teeth, folded feathered arms with clawed hands, a feather fan on the stiff tail and the big sickle claw held up on each foot. Idle, Walk, Run and Roar clips.
  Nodes: Velociraptor, Neck, Head, Jaw, Tail_1, Tail_2, Tail_3, Leg_HL, Shin_HL, Foot_HL, Leg_HR, Shin_HR, Foot_HR, Arm_L, Arm_R

pteranodon.glb  Pteranodon (Flying reptile): 9,698 triangles, 661 KB, 6.20 x 2.70 x 0.59 m
  A flying Pteranodon, 6.2 m across the wings: a long pointed toothless beak, a crest sweeping back from the head and skin wings that fold at the shoulder, elbow and finger so they stay whole as they beat. Glide, Flap and Bank clips.
  Nodes: Pteranodon, Neck, Head, Jaw, Wing_L, Fore_L, Finger_L, Wing_R, Fore_R, Finger_R

dinosaur-egg-nest.glb  Dinosaur Egg Nest (Prop): 7,926 triangles, 547 KB, 1.96 x 1.96 x 0.31 m
  A dinosaur nest about 1.9 m across: a raised ring of earth lined with straw and twigs and a clutch of nine long speckled eggs, one of them rocking as it hatches (Wobble clip).
  Nodes: Egg_Nest, Egg_Hatch

cycad.glb  Cycad (Plant): 5,232 triangles, 442 KB, 3.71 x 3.47 x 2.33 m
  A cycad, the palm-like plant of the dinosaur age, about 2.2 m tall: a stout trunk patterned with old leaf bases, 30 stiff arching leaves and an orange seed cone at the centre.


How to use
----------
three.js: GLTFLoader. Unity: the glTFast package (com.unity.cloud.gltfast). Godot 4: drop the .glb in the
FileSystem dock. Blender: File > Import > glTF 2.0, and export to FBX, OBJ or STL from there if you need to.

More free models: https://vinish.dev/free-3d-models/
