Construction: free GLB models by vinish.dev
============================================================

Page: https://vinish.dev/free-3d-models/construction/
Licence: CC BY 4.0 (see LICENSE.txt). Credit lines: CREDITS.txt.

What is inside
--------------
- 15 GLB files (binary glTF 2.0), one model each, plus a preview image of each in previews/.
- Sizes are in metres (width x depth x height below). +Y is up, the front faces +Z, the origin is on the ground.
- The textures (colour and normal maps) are packed inside each GLB.
- Moving parts are separate nodes with their pivots at the joints or hinges. Their names are listed below.

Models
------
excavator.glb  Tracked Excavator (Construction vehicle): 23,150 triangles, 868 KB, 3.03 x 9.45 x 4.94 m
  A 20-tonne class crawler excavator with a cab, a curved boom, an arm and a toothed bucket. The upper swings, and every hydraulic ram extends with the Dig clip.
  Nodes: Excavator, Upper, Boom, Arm, Bucket, Bucket_Ram, Bucket_Ram_Rod, Arm_Ram, Arm_Ram_Rod, Boom_Ram_L, Boom_Ram_L_Rod, Boom_Ram_R, Boom_Ram_R_Rod

bulldozer.glb  Bulldozer (Construction vehicle): 19,320 triangles, 714 KB, 3.40 x 5.56 x 3.19 m
  A crawler dozer with a curved push blade on push arms, a ROPS cab and a rear ripper. The Push clip lowers and lifts the blade and drops the ripper, rams and all.
  Nodes: Bulldozer, Blade, Ripper, Lift_Ram_L, Lift_Ram_L_Rod, Lift_Ram_R, Lift_Ram_R_Rod, Ripper_Ram, Ripper_Ram_Rod

wheel-loader.glb  Wheel Loader (Construction vehicle): 21,050 triangles, 498 KB, 2.95 x 8.48 x 3.38 m
  An articulated wheel loader with a 2.9 m bucket, lift arms and tilt ram. The Load clip racks, lifts and dumps the bucket; the Steer clip turns the front frame at the hinge.
  Nodes: Wheel_Loader, Front, Boom, Bucket, Tilt_Ram, Tilt_Ram_Rod, Lift_Ram_L, Lift_Ram_L_Rod, Lift_Ram_R, Lift_Ram_R_Rod, Wheel_FL, Wheel_FR, Wheel_RL, Wheel_RR

dump-truck.glb  Tipper Dump Truck (Construction vehicle): 27,910 triangles, 503 KB, 3.04 x 7.55 x 3.27 m
  A three-axle cab-over tipper with ten wheels, a steel body and a cab guard. The Tip clip raises the body on a telescopic ram while the tailgate swings free.
  Nodes: Dump_Truck, Hub_FL, Wheel_FL, Hub_FR, Wheel_FR, Wheel_RL1, Wheel_RR1, Wheel_RL2, Wheel_RR2, Bed, Tailgate, Tip_Ram, Tip_Ram_Stage1, Tip_Ram_Stage2, Tip_Ram_Stage3, Tip_Ram_Stage4, Tip_Ram_Stage5, Tip_Ram_Stage6

mixer-truck.glb  Concrete Mixer Truck (Construction vehicle): 30,318 triangles, 528 KB, 3.04 x 8.63 x 3.77 m
  A three-axle concrete mixer with a striped drum, hopper, ladder and swinging chute. The Mix clip turns the drum; the Pour clip reverses it and swings the chute.
  Nodes: Mixer_Truck, Hub_FL, Wheel_FL, Hub_FR, Wheel_FR, Wheel_RL1, Wheel_RR1, Wheel_RL2, Wheel_RR2, Drum, Chute

tower-crane.glb  Tower Crane (Construction vehicle): 10,950 triangles, 508 KB, 4.40 x 47.05 x 33.32 m
  A hammerhead tower crane: a 25 m lattice mast, a 35 m jib, counterweights, a cab and pendant ties. The Work clip slews the top, runs the trolley out and lowers the hook.
  Nodes: Tower_Crane, Slew, Trolley, Hoist_Rope, Hook

forklift.glb  Forklift (Construction vehicle): 8,730 triangles, 248 KB, 1.12 x 3.29 x 2.45 m
  A counterbalance forklift with an overhead guard and a two-stage mast. The Lift clip tilts the mast back and raises the forks 1.7 m; rear hubs steer.
  Nodes: Forklift, Mast, Mast_Inner, Carriage, Tilt_Ram_L, Tilt_Ram_L_Rod, Tilt_Ram_R, Tilt_Ram_R_Rod, Wheel_FL, Wheel_FR, Hub_RL, Wheel_RL, Hub_RR, Wheel_RR

road-roller.glb  Road Roller (Construction vehicle): 5,094 triangles, 146 KB, 1.76 x 3.88 x 3.21 m
  A tandem asphalt roller with two steel drums, water tanks, spray bars and a canopy over the seat. The Roll clip turns both drums.
  Nodes: Road_Roller, Drum_F, Drum_R

cement-mixer.glb  Cement Mixer (Site prop): 2,851 triangles, 99 KB, 0.98 x 1.65 x 1.52 m
  A small towable site mixer with a tilting drum, a ring gear and a hand wheel. The Mix clip spins the drum; the Tip clip tips it to pour.
  Nodes: Cement_Mixer, Yoke, Drum

skip.glb  Skip (Site prop): 852 triangles, 45 KB, 1.97 x 3.73 x 1.36 m
  An open steel skip with sloped sides, ribs, lifting trunnions and striped end panels, hollow inside for filling.

site-fence.glb  Site Fence Panel (Site prop): 876 triangles, 63 KB, 4.17 x 0.22 x 2.10 m
  A 3.5 m temporary mesh fence panel on two concrete feet with clamps. Panels line up end to end.

scaffold.glb  Scaffold Tower (Site prop): 2,656 triangles, 261 KB, 3.39 x 1.95 x 5.02 m
  A one-bay tube scaffold, 5 m tall, with two boarded lifts, toe boards, guard rails, bracing, base plates on sole boards and a ladder.

portable-toilet.glb  Portable Toilet (Site prop): 1,506 triangles, 56 KB, 1.24 x 1.24 x 2.79 m
  A ribbed plastic site toilet cabin with a vent pipe and a seat inside. The door swings open with the Open clip.
  Nodes: Portable_Toilet, Door

steel-beams.glb  Steel Beams (Site prop): 372 triangles, 128 KB, 1.50 x 6.00 x 0.85 m
  Seven 6 m I-beams stacked in two layers on timber bearers, ends marked in red paint.

hard-hat.glb  Hard Hat (Site prop): 2,216 triangles, 57 KB, 0.33 x 0.40 x 0.18 m
  A yellow safety helmet with a crown ridge, a short peak and the head harness inside.


How to use
----------
three.js: GLTFLoader. Unity: the glTFast package (com.unity.cloud.gltfast). Godot 4: drop the .glb in the
FileSystem dock. Blender: File > Import > glTF 2.0, and export to FBX, OBJ or STL from there if you need to.

More free models: https://vinish.dev/free-3d-models/
