Boats: free GLB models by vinish.dev
============================================================

Page: https://vinish.dev/free-3d-models/boats/
Licence: CC BY 4.0 (see LICENSE.txt). Credit lines: CREDITS.txt.

What is inside
--------------
- 13 GLB files (binary glTF 2.0), one model each, plus a preview image of each in previews/.
- Sizes are in metres (width x depth x height below). +Y is up, the front faces +Z, the origin is on the ground.
- The textures (colour and normal maps) are packed inside each GLB.
- Moving parts are separate nodes with their pivots at the joints or hinges. Their names are listed below.

Models
------
speedboat.glb  Speedboat (Motor boat): 14,038 triangles, 497 KB, 2.30 x 6.82 x 1.96 m
  A 6 m bowrider runabout with a wrap-round windscreen, helm seats and a rear bench. The outboard Motor node turns to steer and its Propeller spins.
  Nodes: Speedboat, Motor, Propeller

sailboat.glb  Sailboat (Sailing yacht): 19,554 triangles, 626 KB, 2.80 x 8.45 x 13.48 m
  An 8.5 m cruising sloop with a fin keel, cabin, jib and mainsail, 13.5 m to the masthead. The Boom (with the mainsail) swings round the mast and the Rudder turns with its tiller.
  Nodes: Sailboat, Boom, Rudder

rowboat.glb  Rowboat (Rowing boat): 7,990 triangles, 370 KB, 4.71 x 3.62 x 0.82 m
  A 3.6 m clinker-built wooden dinghy with three thwarts and bronze oarlocks. The Oar_L and Oar_R nodes pivot in the locks, and a Row clip sweeps, dips and feathers them.
  Nodes: Rowboat, Oar_L, Oar_R

fishing-boat.glb  Fishing Boat (Trawler): 18,224 triangles, 510 KB, 4.55 x 11.90 x 7.51 m
  A 12 m steel trawler with a wheelhouse, net drum, stern gantry and tyre fenders. The Radar bar, Propeller and Rudder are nodes.
  Nodes: Fishing_Boat, Radar, Propeller, Rudder

container-ship.glb  Container Ship (Cargo ship): 16,986 triangles, 473 KB, 15.00 x 93.41 x 28.94 m
  A 92 m feeder container ship with a bulbous bow, eighty coloured 40 ft containers, an aft bridge block and funnel. The Radar, Propeller and Rudder are nodes.
  Nodes: Container_Ship, Radar, Propeller, Rudder

jet-ski.glb  Jet Ski (Personal watercraft): 10,994 triangles, 239 KB, 1.20 x 3.37 x 1.24 m
  A 3.2 m three-seat personal watercraft in yellow, black and white with a jet pump at the stern. The Handlebar node turns to steer.
  Nodes: Jet_Ski, Handlebar

submarine.glb  Submarine (Submarine): 12,720 triangles, 262 KB, 4.20 x 30.53 x 8.32 m
  A 30 m diesel-electric patrol submarine in matte black, with no markings. The Periscope slides up, the sail and stern planes, Rudder and seven-blade Propeller are nodes.
  Nodes: Submarine, Sail_Planes, Periscope, Rudder, Stern_Planes, Propeller

kayak.glb  Kayak (Kayak): 11,385 triangles, 284 KB, 2.79 x 3.90 x 0.47 m
  A 3.9 m sit-in touring kayak with hatches and deck lines. The Paddle rests on the fore deck; its Paddle clip lifts it to a seated paddler and strokes left and right.
  Nodes: Kayak, Paddle

rescue-boat.glb  Rescue Boat (Rigid inflatable boat): 19,047 triangles, 459 KB, 2.46 x 6.46 x 2.42 m
  A 5.5 m rigid inflatable rescue boat with an orange collar, centre console, jockey seat and light arch. The outboard Motor node steers and its Propeller spins.
  Nodes: Rescue_Boat, Motor, Propeller

channel-buoy.glb  Channel Buoy (Harbour prop): 1,600 triangles, 51 KB, 1.81 x 1.81 x 3.81 m
  A 3.8 m red channel-marker buoy with a lattice tower, radar reflector, can top mark and a red lantern. It floats with about 0.5 m of the hull under water.

mooring-bollard.glb  Mooring Bollard (Harbour prop): 960 triangles, 31 KB, 0.64 x 1.23 x 0.62 m
  A cast-iron mooring bollard on a base plate with a mooring line looped round it.

life-ring-post.glb  Life Ring Post (Harbour prop): 2,268 triangles, 138 KB, 0.86 x 0.32 x 1.60 m
  A wooden post with a sign board and an orange and white life ring with its grab line.

wooden-dock.glb  Wooden Dock (Harbour prop): 6,176 triangles, 317 KB, 2.79 x 4.00 x 1.96 m
  A 4 m wooden dock section, 2.4 m wide with the deck 1.2 m up on six piles, cleats, tyre fenders and a ladder. Sections line up end to end.


How to use
----------
three.js: GLTFLoader. Unity: the glTFast package (com.unity.cloud.gltfast). Godot 4: drop the .glb in the
FileSystem dock. Blender: File > Import > glTF 2.0, and export to FBX, OBJ or STL from there if you need to.

More free models: https://vinish.dev/free-3d-models/
